行业动态
Topum In-die Tapping Machine Solution Cooperation Process
作者：管理员 发布于：2026-04-20 11:32:57
Topum collaborates with numerous renowned manufacturers both domestically and internationally. We provide you with in-die tapping machine solutions. Below is the cooperation solution process for Topum in-die tapping machines. You are welcome to read it.
I. Please provide the following information before the telephone consultation
- Press: Brand ____ Stroke ____ Tonnage ____ Model ____
- Feeding method: Pneumatic feeding □ High-speed roller feeding □ NC feeding □ Other □
- Feeding angle: ______
- Product carrier strip drawing: (CAD electronic file)
- Product drawing: (CAD electronic file)
- Material used: _____
- Preliminary speed requirement after installing the in-die tapping machine: _____
- Stamping speed: ____ pcs/h (without in-die tapping machine)
- Manual tapping speed using ordinary tapping machine: ______ pcs/h; Monthly output: _____ pcs
II. Based on the above information, Topum will design a solution for the inquirer.
III. After receiving the design solution from Topum, the inquirer shall design the die structure drawing and send it back to Topum for confirmation.
IV. The optimal in-die tapping solution will then be determined.
V. Once both parties confirm the optimal solution, the inquirer places an order → After Topum receives the order, the inquirer begins modifying or developing a new die, while Topum starts producing the tapping machine.
VI. After the inquirer completes the die modification and produces tapped products through self-installation and commissioning, Topum shall be notified.
VII. Topum delivers the machine, performs installation and commissioning, produces qualified products on a trial basis, and trains the relevant operation and management personnel of the inquirer.
VIII. After-sales service.
上一个：没有了
下一个：冲裁双面有毛刺怎么办？